YachtByte Official Resource
UPS identification
- UPS name and location recorded.
- Protected loads listed.
- Load category assigned: guest, operational, safety-adjacent or approved emergency if applicable.
- UPS capacity, model and serial recorded.
- Battery chemistry and battery installation date recorded.
Runtime evidence
- Actual load recorded.
- Last runtime test date recorded.
- Tested runtime recorded.
- Battery state and self-test result recorded.
- Next test and replacement date assigned.
Monitoring
- Normal, battery and bypass modes understood.
- UPS alarms visible to engineering, ETO or monitoring dashboard.
- Network card or management interface checked.
- Bypass state escalated as a defect.
- Alarm history reviewed after power events.
Critical load review
- Firewall, WAN, SatCom, CCTV, access control, monitoring, servers and bridge-adjacent loads reviewed.
- Old loads removed from register.
- New AV/IT or security loads added after refit.
- Management informed of battery replacement budget before failure.