YachtByte Official Resource
Pre-trip access
- Guest SSID enabled and mapped to the correct guest VLAN.
- Guest password, voucher or portal access method confirmed.
- Old guest vouchers or temporary accounts removed.
- Shared password rotation reviewed.
- Contractor, event or yard SSIDs disabled if no longer needed.
- Support contact and escalation route confirmed.
Separation and privacy
- Client isolation tested from a real guest device.
- Guest device cannot reach firewall, switch or controller management.
- Guest device cannot reach owner, crew, AV/control, CCTV, bridge-adjacent or OT networks.
- Portal data collection reviewed.
- Guest logs and retention expectations reviewed.
- Screenshots or exports shared with vendors only when needed.
Performance readiness
- WAN links and failover state checked.
- Bandwidth profile or per-device limits applied.
- DHCP pool capacity checked for expected guest load.
- DNS/filtering policy tested.
- AP health and controller status checked.
- Coverage tested in priority guest spaces.
- Streaming, video call and messaging behaviour spot-checked.
During-trip monitoring
- Client count monitored.
- Top bandwidth consumers reviewed without unnecessary privacy intrusion.
- DHCP pool usage monitored.
- WAN latency or packet loss watched.
- Repeated disconnects or roaming complaints recorded.
- Guest complaints logged with location and time.
Post-trip reset
- Temporary vouchers removed.
- Shared guest password rotated where appropriate.
- Old device authorisations cleared.
- Stale DHCP or portal entries reviewed.
- Temporary bandwidth exceptions removed.
- Only necessary logs retained.
- Coverage or performance issues added to the fault list.
- Network records updated if SSID, VLAN, portal or bandwidth policy changed.